Hi All,
I am using first time In memory table concept in SSIS package.
my requirement is as below
1-I am loading data from source to target.
my source is flat file.
I want to load the flat file data into in memory table(table variable @test table) and then load data from memory table to target sql table.
Kindly help me to understand, can we used table variable in OLED Destination .
↧
Load data from In memory table in SSIS
↧
ADO Source Error - DTS_E_PRIMEOUTPUTFAILED - 0xC02090F5
Hi,
I am trying to 44,152,880 rows from a PostGres datasource into SQLServer, the dataflow consists of just an ADO Source and OLEDB Destination.
I have cut down the query to just
Select CAST( Field1 AS CHAR(10)) AS Field1 FROM MyTable WHERE MyDate >= '2012/10/01'
Previously it would fail at about 10 million rows when there were more fields, now it fails at about the 30 million mark.
The only errors present are
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ERROR [40001] ERROR: canceling statement due to conflict with recovery;
Error fetching next row
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on ADO NET Source returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
There is no further info on what the error is from progress tab within the VS IDE.
I have tried updating the ODBC driver.
Limiting the SQLServer DB instance memory usage, as the box only has 16GB memory.
I am not sure what else to try, other then to possibly attempt to break the load into smaller batches.
Any tips or advise on how to proceed would be much appreciated.
Thanks
Jon
↧
↧
SSIS job trigger only if file exists on FTP website
Hi We have SSIS job which read file from FTP website using FTP task. Now we want to add functionality to trigger this job automatically if file is present on FTP website and time is say between 6PM and 10 PM.
Can this be achieved in by writing TSQL in new step before SQL agent job or we need to have new SSIS package in new step in SQL agent job?
↧
LTRIM Not working
Hi,
I'm loading data from a table (sql server db) into a flat file. I have around 30 columns. When i open the .csv with excel i noticed that few columns were having spaces before or after them. For example zip code is having large spaces in front of it. I used LTRIM in the derived column and did run the package again, but with no luck. Any ideas where am doing wrong?
Thanks
SV
↧
table partition and parallel load in SSIS
1. load data for different batches in the same set of tables parallel using SSIS 2012
Steps :
a) Created 4 file Groups and 4 ndf files .
b)1st ndf file points to C drive
c) 2nd ndf file point to D drive
d) The remaning 2 ndf is pointed to D drive
3. Create Partition Function for values 10,20,30 (RIGHT Partition On BatchId ) which is available in the Target Table as column
4. Create Partition Scheme on the 4 File Groups
5. The Target Table has been created using Partition Function using BatchId
6. While Loading data parallel for 2 batches i.e 1 to 10 and 11 to 20 locks are coming.
Please suggest the best approach
↧
↧
Google Analytics data To MSSQL with SSIS
Hi
Need to export each week the historal data from my Google Analytics account ( Universal Analytic)
I downloaded 'GoogleAnalyticsSource 2012' and would like to know if someone has used this component ? What feedback ? How to know which dimensions can be combined with which metrics ?
or is there any other possibility to get GA data with SSIS
Thx
↧
Error in creating custom SSIS component in sql server 2014
===================================
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
===================================
Error at Data Flow Task [SSIS.Pipeline]: Component , clsid {33D831DE-5DCF-48F0-B431-4D327B9E785D} failed to initialize due to error 0x80131600 "".
Error at Data Flow Task [ [5]]: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
===================================
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError, Boolean select)
What was the possible causes.Please help me.This is irritating stuff
↧
#TempTable for Email Message
I have created a #TempTable for storing an email message and am trying then to UPDATE the #TempTable_EmailMessage contents with an email message. When I attempt running it, I am getting...
UPDATE failed with the following error:
"Invalid object name '#TempTable_EmailMessage'. Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly
The ResultSet property is set to None. Is this some sort of pre-validation eror since I'm creating the #TempTable on the fly? Do I need to create a ##TempTable instead???
Thanks for your review and am hopeful for a reply.
↧
ForEach Loop Container Not Getting All Files
Hello, August Members of the Sages Guild!
I have an SSIS package that processes incoming Excel reports into a historical SQL table for data mining. It's been working fine and dandy, but, recently, two runs missed some Excel reports.
It's not something I can replicate, as it's sporadic - highly so; the vast majority of the time, it works seamlessly - but, I've got a hunch that it's a matter of timing; that one Control Flow or Data Flow task is being flagged as complete when the actual process within that task is truly not finished.
What the package does;
Within a ForEach Loop Container;
1. Clear out Staging table 1 with a SQL Task doing a TRUNCATE,
2. Clear out Staging table 2 with a SQL Task doing a TRUNCATE,
3. Run a C# script to scan the existing Excel reports to find the oldest report and make it the active report,
4. Import Sheet 1 of the active report into Staging1,
5. Import Sheet 2 of the active report into Staging2,
6. Use a UNION ALL task to send both Staging1 and Staging2 to the History table,
7. Delete the active Excel report file.
Of course, the ForEach Loop Container will check for another report, processing it the same way, finally to stop when all files have been processed.
Now, this has worked like a charm for almost a year, but twice now - last week and today - the container signalled that it successfully completed - it turned green - before having run through all of the Excel files. The only real change is that last week the Excel files jumped in size to about double or triple what they had been when it worked flawlessly.
So, I'm thinking, maybe there is a task getting ahead of itself or something. I thought, maybe a task to run a 1 or 2 second timer to give SSIS a chance to ensure it can "catch its breath" before continuing on to the next task might alleviate this issue. Maybe, I thought, my Excel files are getting too big for SSIS to handle so much at one time. Maybe even, if there is such a setting, something to tell SSIS to slow down a mite.
I guess I could gin up a script to just run a loop to account for a couple of seconds delay, since there doesn't seem to be a timer task in the tooolbox, but I wonder if my hunch is even correct, before I embark on this adventure.
Any ideas?
↧
↧
SSIS package failing
Hi on my Dev box the SSIS package is working, but when moving on to other server...I am receiving below error. How can i solve this issue ?
"SQL Server Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. ". End Error Error: 2016-01-18 19:07:19.12 Code: 0xC020801C Source: Data Flow Task OLE DB Source [25] Description: SSIS Error Code DTS_E_
CANNOTACQUIRECONNECTIONFROMCON The package execution failed. The step failed.NECTIONMANAGER. The AcquireConnection method call to the connection manager "dsArmaninoTDF" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2016-01-18 19:07:19.12 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline Description: OLE DB Source failed validation and returned error code 0xC020801C. End Error Error: 2016-01-18 19:07:19.12 Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2016-01-18 19:07:19.12 Code: 0xC0024107 Source: Data Flow Task Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 7:07:00 PM Finished: 7:07:19 PM Elapsed: 18.594 seconds.
MBH
↧
Need Support for Attunity SSIS connector for SQL Server 2014
Hi
We are using following setup
Visual stuido 2012 version 11.0.50727.1 RTMREL
Destination Server : SQL Server 2014 version (12.0.2000)
DB Server: Windows Server 2012 R2
Development Server: Windows Server 2008 R2
Source Server:Oracle 10g 10.2.0.4.0
we are using attunity 3.0 for connecting oracle source system ,in visual studio we are able to run the developed packages when we are deploying into Integration Services Catalogs we are facing the below errors
:Error: The connection type "MSORA" specified for connection manager "ATTINUTY_ORACLE_IPRO" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
:Error: Error loading value "<DTS:ConnectionManagers xmlns:DTS="<DTS:ConnectionManager">www.microsoft.com/SqlServer/Dts"><DTS:ConnectionManager DTS:refId="Package.ConnectionManagers[ATTINUTY_ORACLE_IPRO]" DTS:CreationName="MSORA" DTS:DTSID="{10B2A577-E481-4F5A-A14F-F19373B3E07F}" DTS:ObjectName="ATTINUTY_ORA" from node "DTS:ConnectionManagers".
have any one else faced this issue ? are there any fix or workarounds for this?
Let me know if you need any more information .
Thanks in Advance .
↧
SSIS Script Component Transformation Set
Is it possible to read, change and output dataflow whole at once in the Script Component transformation? As array set, not row by row.
↧
MSDB folder not expanding in Integration services
I am running in t-sql
select serverproperty('servername')
I am getting the servername as 'AKI'
select serverproperty('InstanceaName')
I am getting Instance Name as 'Null'
After this i made some changes to 'MsDtsSrvr.ini.xml' file.
I inserted server name in it. The file looks like a s follow
<?xml version="1.0" encoding="utf-8"?>
<DtsServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<StopExecutingPackagesOnShutdown>true</StopExecutingPackagesOnShutdown>
<TopLevelFolders>
<Folder xsi:type="SqlServerFolder">
<Name>MSDB</Name>
<ServerName>AKI</ServerName>
</Folder>
<Folder xsi:type="FileSystemFolder">
<Name>File System</Name>
<StorePath>..\Packages</StorePath>
</Folder>
</TopLevelFolders>
</DtsServiceConfiguration>A
I thought i made the necessary changes but i am still not able to expand MSDB folder in Intergration services.
Error:
The SQL Server instance specified in SSIS service configuration is not present or is not available. This might occur when there is no default instance of SQL Server on the computer. For more information, see the topic "Configuring the Integration Services Service" in SQL Server 2008 R2 Books Online.
Login failed for user 'mike2'. (MsDtsSrvr)
I am logging to intergration services in SSMS by Window Authentication.
I am not sure but when i try to connect to database engine in SSMS by window authentication, it gives me error:
Login Failed for user.
May be its a permission issue only as i am able to connect to integration services but not database engine through windows authentications.
Please suggest me a solution.
Thanks
↧
↧
SSIS Lookup with Null source
I have used lookup transformation with partial chache enable option .But my source have Null value in XYZ column that i m trying to match with destination table XYZ column , problem is when it match NULL source value with NULL lookup value even though
its treated as not match and rows are redirected..can anyone help to resolve this issue ???
↧
Trying to do look up
Hi,
I am trying to do look up , but when I am running the project I am having
[OLE DB Destination [39]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Cannot insert the value NULL into column 'EmployeeKey', table 'TestingDB.dbo.DimEmployee'; column does not allow
nulls. INSERT fails.".
but EmployeeKey is my identifier and it can not be NULL!!!
↧
Function [get_principal_id_by_sid] is being called 3 to 11 million times an hour
Our number 1 query in times of execution time is the SSIS permission function [get_principal_id_by_sid] . I do not know why it is being invoked so often from our SSIS scheduling server. We don't have SSIS packages being called that often! I am not sure quite what to do about it, so any thoughts are much appreciated.
Regards
Rob
↧
How to render a SSRS report and send it as attachment WITHOUT saving the file in the file system
Hi folks,
i need to run parameterized SSRS reports and send them to different user email adresses.
Example:
Report1 ; a@abc.com; param1=a format=pdf
Report1 ; b@abc.com; param1=b; format=excel
Report2 ; c@abc.com; param1=c; format=excel
I need a solution with SSIS WITHOUT saving the rendered report on the server.
My idea is to hold the rendered document in memory and then attach it into the mail (Send mail task or custom task). Any ideas or example code?
Thanks,
Ayhan.O
↧
↧
SSIS Service and Access Denied
I've just finished installing and configuring a new SSIS Server and I am still unable to connect, receiving instead an "Access Denied" error.
I followed the recommendations of this article by adding my domain account to the local "Distributed COM Users" group, then granting remote launch, activation, and access permissions for the SSIS 12.0 service to this group via dcomcnfg.
When this didn't work, I modified the Windows Firewall on the target machine based on this article even though the firewall is not currently running. Still no luck.
Finally, I added my domain login to the local Administrators group. This didn't work either, the "Access Denied" error persisted.
What am I missing? What else can I check?
Thanks all.
↧
SSIS - Package designer bug VS2012 and VS2013
The appropriate and most recent versions of SSDT are used when this is tested in VS2012 and VS2013 and the same result is found.
The bug occurs in the package designer Data Flow when executing a child package from a parent package using an Execute Package Task.
The icons for success, failure or in progress do not report correctly in that not all components have an icon on them on package completion/success. In addition the number of rows processed may either show 0 rows or may not be present at all.
Using the most basic child package as an example, a package is created which connects to a 2014 SQL server. 11 rows are selected from source table into a destination table. This is done using OLE DB source and OLE destination components with Data Access set to 'Table or view' in both components. The child package is saved and closed. The child package is then executed from an Execute Package Task in a parent package using the Reference Type: Project Reference setting.
The result which should be seen in the package designer for the child package should be success on both OLE DB Source and OLE DB destination with 11 rows reported to have been taken into the data flow.
When run multiple times with the child package performing its data task correctly the designer shows either the success icon on only one component (could be either), no success icon present on either component or success on both. The text which shows the number of rows processed in the package designer may show 0 rows (this is incorrect), may not be present at all or show 11 rows processed. Very inconsistent even as a bug and very rarely showing the correct result.
We have read suggestions from other users such as formatting again using Auto layout, setting the child package setting to FailParentPackageOnFailure to True and not using Data access mode 'Table or view - fast load'. None of these worked for us.
Many other settings such as executing the child package as an external reference and various data access modes have been tried to no avail.
Other elements in the package designer included for this test behave correctly in that the Execute Package Task in the parent package and the Data Flow Task in the child package report with a Success icon every time as they should.
We would be interested to know if anybody has found a way to fix it, can replicate the same issue or has knowledge of it being reported to Microsoft. ↧
Create Table on run time From source File
Hi All,
I have one requirment in SSIS Package.
I have to create the table on rum time on the basis of source file.
for example.
i have a source file with 4 column. source file name emp.txt
ID
NAME
AGE
GENDER
so at run time my package should create table with above 4 column only.
Thanks in dvance
Thankx & regards, Vipin jha MCP
↧